<b>Frames for Sheet and Layout</b>Date:>LAST_DATE_TIMESheet:>SHEETREV:TITLE:Document Number:>DRAWING_NAME<b>FRAME</b> A Size , 8 1/2 x 11 INCH, Landscape<p><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><h3>SparkFun Electronics' preferred foot prints</h3>
We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>Fiducial Alignment Points</b>
Various fiducial points for machine vision alignment.<h3>SparkFun Font Logo w/ Flame - 0.1" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.2" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.3" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.4" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.5" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.6" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.7" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.8" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.9" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 1.0" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame - 0.15" Height - Silkscreen</h3>
<p>SparkFun font logo with flame logo</p>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p>ResetDoneBuilt by:<h3>SparkFun Font Logo w/ Flame</h3>
<p>Devices using:
<ul><li>SFE_LOGO_NAME_FLAME</li></ul></p><h3>SparkFun Font Logo w/ Flame</h3>
<p>This is the SparkFun full logo. The logo on the schematic will always be the same size; the package variant is the height of the flame part of the logo. Default layer for the logo on the board is tSilk.</p><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p><h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE2 pin poke-home connector
part number 2062-2P from STA>NAME>VALUEBOARD EDGE>NAME>VALUE>Name>Value<h3>2 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432<h3>SparkFun Aesthetics</h3>
This library contiains non-functional items such as logos, build/ordering notes, frame blocks, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.Qwiic Logos for placement on schematic and PCB. The 5.5mm silk logo is best for placing next to Qwiic connector.<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUESource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf>NAME>VALUECeramic Chip Capacitor KEMET 1206 reflow solder
Metric Code Size 3216Ceramic Chip Capacitor KEMET 0805 reflow solder
Metric Code Size 2012CAPACITORSource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf>NAME>VALUE<b>DIODE</b>>NAME>VALUE<B>DIODE</B>>NAME>VALUE<b>FAIRCHILD SEMICONDUCTOR</b> SOIC127P600X175-8M<p>
JEDEC MS-012. VARIATION AA.<br>
Source: http://www.fairchildsemi.com/dwg/M0/M08A.pdf>NAME>VALUEDIODEDIODE>NAME>VALUESpiceOrder 1SpiceOrder 2>NAME>VALUEDSG<b>DIODE</b><b>Dual N-Channel 2.5V Specified PowerTrenchTM MOSFET</b><p>
Source: FDS6890A.pdf<h3>SMD- 4 Pin Right Angle </h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE>Name>Value>NAME>VALUESMD- 4 Pin Right Angle
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
<h3>SparkFun I<sup>2</sup>C Standard Pinout Header</h3>
<p>SparkFun has standardized on a pinout for all I<sup>2</sup>C based sensor breakouts.<br>>VALUE>NAMESDAVCCGNDSCLUSB-C>VALUE>NAME>VALUE>NAME<h3>SparkFun I<sup>2</sup>C Standard Qwiic Connector</h3>
An SMD 1mm pitch JST connector makes it easy and quick (get it? Qwiic?) to connect I<sup>2</sup>C devices to each other. The <a href=”http://www.sparkfun.com/qwiic”>Qwiic system</a> enables fast and solderless connection between popular platforms and various sensors and actuators.
<br><br>
We carry <a href=”https://www.sparkfun.com/products/14204”>200mm</a>, <a href=”https://www.sparkfun.com/products/14205”>100mm</a>, <a href=”https://www.sparkfun.com/products/14206”>50mm</a>, and <a href=”https://www.sparkfun.com/products/14207”>breadboard friendly</a> Qwiic cables. We also offer <a href=”https://www.sparkfun.com/products/14323”>10 pcs strips</a> the SMD connectors.>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_R971.pdf>NAME>VALUE>NAME>VALUE<b>LED</b><p>
<u>OSRAM</u>:<br>
- <u>CHIPLED</u><br>
LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971
LH N974, LH R974<br>
LS Q976, LO Q976, LY Q976<br>
LO Q996<br>
- <u>Hyper CHIPLED</u><br>
LW Q18S<br>
LB Q993, LB Q99A, LB R99A<br>
- <u>SideLED</u><br>
LS A670, LO A670, LY A670, LG A670, LP A670<br>
LB A673, LV A673, LT A673, LW A673<br>
LH A674<br>
LY A675<br>
LS A676, LA A676, LO A676, LY A676, LW A676<br>
LS A679, LY A679, LG A679<br>
- <u>Hyper Micro SIDELED®</u><br>
LS Y876, LA Y876, LO Y876, LY Y876<br>
LT Y87S<br>
- <u>SmartLED</u><br>
LW L88C, LW L88S<br>
LB L89C, LB L89S, LG L890<br>
LS L89K, LO L89K, LY L89K<br>
LS L896, LA L896, LO L896, LY L896<br>
- <u>TOPLED</u><br>
LS T670, LO T670, LY T670, LG T670, LP T670<br>
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br>
LG T671, LOG T671, LSG T671<br>
LB T673, LV T673, LT T673, LW T673<br>
LH T674<br>
LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br>
LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br>
LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br>
LW T67C<br>
LS T679, LY T679, LG T679<br>
LS T770, LO T770, LY T770, LG T770, LP T770<br>
LB T773, LV T773, LT T773, LW T773<br>
LH T774<br>
LS E675, LA E675, LY E675, LS T675<br>
LS T776, LA T776, LO T776, LY T776, LB T776<br>
LHGB T686<br>
LT T68C, LB T68C<br>
- <u>Hyper Mini TOPLED®</u><br>
LB M676<br>
- <u>Mini TOPLED Santana®</u><br>
LG M470<br>
LS M47K, LO M47K, LY M47K<br>
<p>
Source: http://www.osram.convergy.de/<b>Chip RESISTOR 0402 EIA (1005 Metric)</b>>NAME>VALUE<b>Chip Resistor Array</b><p>
Source: http://www.ctscorp.com/components/Datasheets/CTSChipArrayDs.pdf>NAME>VALUE<b>Chip Resistor Array</b><p>
Source: http://www.ctscorp.com/components/Datasheets/CTSChipArrayDs.pdf>NAME>VALUEChip RESISTOR 0402 EIA (1005 Metric)>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>Value>NAME>VALUE<b>Momentary Switch</b>
Button commonly used for reset or general input. Spark Fun Electronics SKU : COM-00097<b>FT256 FTG256</b>>NAME>VALUE>NAME>VALUEFits EIAJ packages (wide version of the SOIC-8).>VALUE>NAME>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>SMALL OUTLINE TRANSISTOR</b><p>
reflow soldering>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEGND>NAME>VALUEXilinx FPGA: XC7A100TFTG2568pin SPI Flash series x25xx. Works with devices like W25X32 and BR25L32>NAME>VALUE>NAME>VALUE>Name>Value>NAME>VALUE123Generic 5x3 and 7x5 oscillatorsReset ButtonBank ABank BBank CBank D
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.